• Can be mixed to suit the task from heavy duty to general cleaning
• Non-caustic and non-corrosive
• Contains 100% alkaline salts

Containing 100% alkaline salts, this non-corrosive, concentrated cleaner is powerful and will remove dirt, grease, mould and smoke stains from almost any surface including painted surfaces, concrete tiles, laminated surfaces, plastics and baths.

Inside

• Before painting, especially to clean smoke stained or greasy walls in the kitchen area.
• Before wallpapering or to assist in the removal of wallpaper glue.
• On internal walls, ceilings, floors, benchtops, tiles, slate, stainless steel, stoves, frypans, range hoods, exhaust fan covers, baths, showers, musty washing machines, glass, windows (refer note below in directions for use on *glass and windows), fridges, cupboards, shelves, oven trays, home brewing equipment, or where concentrated cleaning power or degreasing is required.

Outside

• Weatherboards, external woodwork and brickwork, BBQ’s and hotplates, windows (refer to note on *glass and windows in directions for use), awnings and external blinds, tarpaulins, tonneau covers and greasy engine parts.
• Use on grease and oil stains on driveways and concrete floors. On embedded oil stains make a thick paste and leave on for at least 30 minutes before washing off.

Tricleanium super concentrate can be mixed to a strength to suit. The following rates are recommended:

• Pre-painting and heavy soiling: dilute 1/2 a cup -125ml - of TRICLEANIUM to a 9 L bucket of hot water.
• General cleaning: dilute a 1/4 of a cup - 62.5ml - of TRICLEANIUM to a 9 L bucket of hot water.
• To clean a clothes washing machine: add up to 1 cup - 250ml - of TRICLEANIUM to an empty washing machine, and run on low water level, hot cycle.
• For modern water saving machines: only add between a 1/4 and 1/2 a cup (62.5ml and 125ml) of TRICLEANIUM.

Apply TRICLEANIUM mix using a sponge, cloth or mop, and allow a short time for penetration, but do not allow the surface being washed to dry. This is especially important when cleaning *glass and windows. These must be rinsed immediately with fresh water to avoid the possibility of clouding.

All surfaces that are washed with TRICLEANIUM should be rinsed with fresh water after cleaning.

NOTE: It is not advisable to use TRICLEANIUM on brass and aluminium plated surfaces. Prevent contact with carpets or surfaces that are not colourfast.

Use hot tap water (50-55 degrees) and ensure Tricleanium has diluted by stirring water. Change soiled water frequently. Use a separate bucket of fresh water to rinse sponge, rag, or mop in.

Always test an inconspicuous area of the surface to be cleaned if unsure of the effect TRICLEANIUM may have on that surface.

You can also find us on Facebook and Instagram.

Read the Safety Data Sheet from the company website before use.

• Causes skin irritation.
• Causes serious eye irritation.
• May cause respiratory irritation.
• Harmful to aquatic life due to extreme pH.
• Keep out of reach of children.
• Avoid breathing dusts.
• Do not get in eyes, on skin or on clothing.
• Wash contacted areas thoroughly after handling.
• Use only outdoors or in a well ventilated area.
• Avoid release to the environment.
• Wear protective gloves, protective clothing and eye or face protection.

Call a POISONS CENTRE on 131126 (Australia), 0800 764 766 (New Zealand) or see a doctor if you feel unwell.

Rinse skin or shower with water.

Take off contaminated clothing and wash before reuse.

IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.

IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

If skin irritation occurs: Get medical advice.

If eye irritation occurs: Get medical advice.

Not combustible. Use extinguishing media suited to burning materials.