Low odour, low VOC, powerful, all purpose, biodegradable stripper. Its unique formula makes it safe and easy to use. Starts working in less than 30 mins (up to 24hrs). Penetrates and removes multiple layers depending upon the type of paint and surface.

Shake well and pour into container, brush thick coat onto surface. Wait for 30 minutes or longer and scrape a small area to see if it is ready to be removed. Once ready remove with plastic scraper. Wipe surface clean with water. Alternatively use methylated Spirits on the surface if there is a danger of raising or swelling the timber. Allow surface to dry thoroughly before repainting or sanding. Test in an inconspicuous area before use on any synthetic surface as strippers can damage these surfaces. For overnight stripping, cover the application area with the plastic sheet until ready to scrape. Do not use on fibreglass, plastic or vinyl.

KEEP OUT OF REACH OF CHILDREN. Do NOT swallow. Avoid contact with eyes and skin. Ensure adequate ventilation in confined spaces. Wear protective gloves and safety glasses.

Read the safety data sheet from the company website before use. For advice, contact a Doctor or Poisons Information Centre. Phone Australia 13 11 26; New Zealand 0800 764 766.

IF ON SKIN: Wash skin thoroughly.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation persists or if skin irritation or rashes occur, get medical advice/attention. If swallowed, never give liquid to a person showing signs of reduced awareness. In all cases of contact, if you are concerned get medical advice/attention.